Basic Definitions

This chapter describes basic definitions of terminology used during the Web Flow authentication and authorization process.

The terminology described below is used widely in documentation, Web Flow database model and Web Flow source code. Understanding of most of these terms is required when deploying Web Flow.

General Terminology

Authentication

Authentication is the process of verifying the identity of a user.

Web Flow authentication step identifies the user and stores the user identity.

A typical example of authentication is signing in using a login form with username and password.

Authorization

Authorization is the process of verifying permission granted by an authority.

Web Flow authorization step verifies that the user grants a permission to perform an operation.

A typical example of authorization is verifying that user grants a permission to process a payment using PIN code/fingerprint/SMS code on a mobile device owned by the user.

Federated authentication and authorization

Federated authentication and authorization allows user to become authenticated and authorize the operation in one system while accessing another system.

Web Flow is used for authentication and authorization in order to secure another otherwise unprotected system.

Authentication and authorization process

Authentication and authorization process in Web Flow is a process which includes one or more authentication steps. Given the security requirements of the operation different authentication and/or authorization steps are required.

Example of a single step process (login):

  • User authentication using a login form with username and password.

Example of a process with multiple steps (payment authorization):

  • User authentication using a login form with username and password.
  • Review of payment details by the user with choice of next authorization step.
  • (option 1) Authorization of payment using SMS message with one time password (OTP) rewritten to a web form.
  • (option 2) Authorization of payment using fingerprint in application running on user mobile device (online mobile token authorization).
  • (option 3) Authorization of payment using QR code with offline signature rewritten to a web form (offline mobile token authorization).

In the example above, the authentication and authorization process is completed once all required steps succeed. In case any of the steps fails, the whole process fails and operation is not authorized.

We also refer to this process as authentication flow, hence the name Web Flow.

PSD2

On October 8, 2015, the European Parliament adopted the European Commission proposal to create safer and more innovative European payments (PSD2, Directive (EU) 2015/2366). The new rules aim to better protect consumers when they pay online, promote the development and use of innovative online and mobile payments such as through open banking, and make cross-border European payment services safer.

An important element of PSD2 is the requirement for strong customer authentication on the majority of electronic payments.

Strong Customer Authentication (SCA)

Strong customer authentication (SCA) is a requirement of the EU Revised Directive on Payment Services (PSD2) on payment service providers within the European Economic Area. The SCA requirement comes into force from 14 September 2019. The requirement ensures that electronic payments are performed with multi-factor authentication, to increase the security of electronic payments. Physical card transactions already commonly have what could be termed strong customer authentication in the EU (Chip and PIN), but this has not generally been true for Internet transactions across the EU prior to the implementation of the requirement.

Web Flow Terminology

Operation

A new operation is created with every authentication process in Web Flow. The operation is mapped 1:1 to the OAuth 2.0 dance.

There are two possible outcomes of an operation:

  • Operation succeeds - the HTTP session becomes authenticated and the user is redirected
  • Operation fails - the HTTP session is not authenticated, an error is displayed and the user is redirected with an error

The operation succeeds only when all required authentication/authorization steps are successfully completed.

The operation may fail due to different reasons, such as:

  • An authentication/authorization step fails (e.g. signature is not valid).
  • Maximum number of attempts is reached causing authentication method to fail.
  • Operation times out.
  • User cancels the operation.
  • User refreshes the browser, navigates to another URL or closes the browser window.

Operation ID

Each operation is identified by a unique operation ID in UUID format. The operation ID is used during the authentication process to access status of the operation and update the operation in Next Step Server.

Operation name

When deploying Web Flow you can define various operation names, which identify the type of operation.

Examples:

  • login
  • authorize_payment
  • login_sca
  • authorize_payment_sca

There need to be different authentication/authorization steps defined for each operation name.

Operation status

Operation status is the most current status of the operation. The operation status is continuously updated as user proceeds through different authentication/authorization steps. Operation detail is another term used for operation status.

Authentication result

Authentication result is one of the following:

  • CONTINUE - additional authentication steps need to be performed
  • FAILED - authentication has failed
  • DONE - authentication has succeeded

Authentication step

Operation consists of multiple authentication/authorization steps. These steps are executed sequentially until there are no more steps to execute or the operation fails.

Authentication step result

Result of the authentication step is one of the following:

  • CONFIRMED - the authentication step has succeeded
  • CANCELED - user canceled the authentication step
  • AUTH_FAILED - the authentication step has failed, however the user can retry the step
  • AUTH_METHOD_FAILED - the authentication method has failed and this step cannot be retried

Operation data

Arbitrary data which is stored together with the operation. Web Flow does not try to interpret this data and only stores it in the database.

For example a payment operation contains following data (as string value):

"{\"amount\":100,\"currency\":\"CZK\",\"account\":\"238400856/0300\",\"note\":\"Utility Bill Payment - 05/2019\",\"dueDate\":\"2019-06-29\"}"

Since Web Flow version 0.20.0 the suggested format of operation data is specified to allow interpretation of data by Mobile token.

Operation form data

Structured data which is used when displaying operation details. The structure of form data is documented in Next Step documentation.

For example a payment operation contains following form data:

  • title: Confirm Payment
  • greeting: Hello, please confirm following payment
  • summary: Hello, please confirm payment 100 CZK to account 238400856/0300.
  • amount: 100 CZK
  • account: 238400856/0300
  • due date: 2019-06-29
  • note: Utility Bill Payment - 05/2019

Operation form field attribute

A structured type of form field in operation form data:

  • AMOUNT
  • NOTE
  • BANK_ACCOUNT_CHOICE
  • KEY_VALUE
  • HEADING
  • PARTY_INFO

See Next Step documentation.

Operation history

Whenever operation progresses to the next step, previous status of operation is stored in operation history.

Operation review

Operation review is a special non-SCA authentication step which handles review of operation form data and next authentication method choice. This step is executed after user is authenticated and the next step is an authorization step.

Organization

Organizations separate users into different segments, such as RETAIL, SME and so on. The organization ID is an identifier used to specify organization selected by the user in the first step of user authentication. Each organization may use different user identifiers and authenticate against different systems. Such functionality is handled in the Data Adapter implementation.

Authentication method

Each step has an associated authentication method which performs either authentication or authorization during the operation.

See chapter Configuring Next Step Definitions for more details.

Authentication method choice

The user becomes authenticated and there are multiple choices available for the next authentication method (which is usually performing authorization, not authentication). The next authentication method is executed based on user choice. This approach is used in non-SCA authentication methods.

Authentication instrument

The user has a choice of using different authentication instruments (SMS, mobile token, hardware token, etc.). The chosen authentication instrument influences how authentication / authorization is done. This approach is used in SCA authentication methods.

Next step of an operation

Each operation consists of multiple steps. The next step of the operation is decided based on following inputs:

  • Authentication step result of the current step.
  • Next step server configuration (definition of next steps).
  • Available authentication methods (some methods may be disabled or temporarily unavailable).
  • Status of the operation (operation may time out, authentication method may fail because of too many attempts, etc.).

Next step definition

Before starting Next Step Server the next step definition has to be defined for all operation names. All steps are defined in database table ns_step_definition.

See chapter Configuring Next Step Definitions for more details.

Next step user preferences

Next step user preferences store configuration for different authentication methods, for instance activation configured for mobile token.

Authorization failure count

A counter of failures during an authentication step.

Maximum authorization failure count

Maximum number of allowed failures during an authentication step.

The maximum number of allowed failures is defined in two areas:

  • Configuration per authentication method, actual number of remaining attempts is decremented with each failure.
  • Each authentication method may provide number of remaining attempts based on information from remote backend.

The effective number of remaining attempts is the lower of the two above mentioned values.

HTTP session

The HTTP session is used in Web Flow in following ways:

  • A client may create an operation with operation data before the OAuth 2.0 authentication is started and store assigned operationId in HTTP session in the operationId attribute. This attribute is picked when authentication is started and Web Flow continues an already existing operation. In case the operationId attribute is not found, Web Flow creates a new login operation with default operation data.
  • During the authentication process, the PENDING_AUTH_OBJECT attribute stored in HTTP session is updated with OAuth 2.0 UserOperationAuthentication token which contains the most current state of authentication.
  • When the authentication process is successfully completed, the HTTP session becomes authenticated with the OAuth 2.0 UserOperationAuthentication token.
  • When the authentication process fails, the PENDING_AUTH_OBJECT attribute is removed from HTTP session. The HTTP session does not become authenticated.

The HTTP session is also used for storing temporary data during operation.

Web Flow operation to session mapping

Each operation has a related HTTP session which is stored in database table wf_operation_session which maps operations to HTTP sessions. The reason for this mapping is to prevent concurrent execution of operations within same HTTP session.

The main impact of verifying presence of operations within HTTP session is that a new operation cancels previous operation started within same HTTP session.

Web socket session

Each operation which includes a PowerAuth mobile token authorization step has a Web Socket session which is open during this step. The Web Socket communication is used for nearly immediate response in the web browser when an operation is confirmed or canceled in the Mobile Token application.

Resource localization

Web Flow contains message resources which can be localized to different languages.

Resource translation

Web Flow supports translation of resources which contain references to values of operation form data. This process is called resource translation.

Anti-fraud system integration

Anti-fraud System (AFS) integration is available for Web Flow. Web Flow triggers AFS actions during login and approval steps both when the step is initialized and when step authentication is performed. The AFS integration allows authentication step-down (e.g. using 1 factor instead of 2 factors or even no factors at all). The AFS is also informed about completed, timed out and interrupted operations. The communication with AFS is handled in Data Adapter.

Last updated on Nov 02, 2019 (03:37) Edit on Github Send Feedback
Search

0.24.x

PowerAuth Web Flow